Description
The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.
Summary
Finish: Original
Body Material: Maple Body
Top Material: Maple Top
Body Details: Hollow body with laminated maple back, sides, and top. There is a small wood block glued inside the treble F-hole for the pickguard screw.
Neck Material: Maple Neck
Neck Profile: “C” profile
Neck Thickness (IN): .87″ (1st fret), .97″ (12th fret)
Fingerboard Radius: 12.00″
Nut Width: 1-11/16″
Scale Length: 24 3/4″
Neck Details: Bolt-on maple neck with unbound rosewood fretboard, dot inlays, zero fret, and heel-adjust truss rod
Electronics: Original single coil pickups and electronics, with 3-way toggle switch, volume controls for each pickup, neck pickup tone control, and bridge pickup bass-cut control. The pickups are out-of-phase in the middle position, and the pot codes are obscured.
Pickup Measurements: 8.6k (neck), 8.9k (bridge)
Hardware: Original; there is no trem arm included.
Weight: 7 lbs 1 oz
Cosmetic Condition: A small cleat has been glued at the treble F-hole to support the pickguard screw.
Modifications/Repairs: A small cleat has been glued at the treble F-hole to support the pickguard screw.
Tech Notes: The guitar plays well with low action and mild neck relief, and is currently set up with 10s. The neck has a slight twist, with the bass side being straighter than the treble side; the guitar has been set up accordingly and plays cleanly and comfortably. The narrow frets are fairly low, with a few small divots and light wear. The “2” serial number prefix dates to 1968.
Case Details: Hardshell case
Reviews
There are no reviews yet.